Most improved, with a lot of power and functions DUAL ASI BAC855 plug and play version for Inokim OXO scooter.
With this setup we worked more than 3 years to present you the best quality and abilities with this controller!
We will prepare the new controller, that you will not need to solder or remake anything.
Simply open the bottom of the scooter, remove the old one and replace it with a new controller
One controller size: 81mm x 55mm x 39mm
One controller weight: 300 grams.
During the installation, make sure that the new controller and cables are protected from dirt and water.
These two ASI BAC 855 controllers can be used with OXO scooters. In order to use all BAC 855 power, it is necessary to replace the battery, which could give at least 160a.
Using original Inokim oxo battery, controllers power will be limited.
Before you buy, you must specify which battery you are using:
- Original Inokim OXO battery – 60v. 25,6ah. (controller will be configured – 2x 106a and 1500w = 3000w).
- 60v., custom-made battery, can give-out 160a. (controller will be configured 2x 106a and 6250w = 12 500w).
- 72v., custom-made battery, can give-out 160a. (controller will be configured 2x 106a and 6500w = 13 000w).
Maximum speed increases up to ~137km / h (tested with 65kg person, 72v. battery and modified motors which you can buy in our store).
Motor radiator – increases the heating area on the engine and blows the wind while cooling the engine.
Also you have to chose which display you want to use with your scooter because you must to change original throttle with screen.
- 750C display:
- Eggrider V2:
(with this display you will get additional button to turn on / off the controller)
- If you do not need display on the scooter, you can choose NONE. You will get this throttle with button to turn on / off controller and with led display which shows only voltage: